Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

program size

Created by: dream1 at: 6/2/2006 9:51 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/2/2006 9:51 AM	Rate (0)
dream1 Posts: 13 Rating: (0)	Hello I need to now the size of my program in step7, for buy a correct EPROM, my question is the next: where I can view the current size of my program. My best regards...
dream1 Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

6/2/2006 10:40 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 5/16/2023 Posts: 8586 Rating: (1127)	Hello, Perhaps the following link will help You, http://support.automation.siemens.com/WW/view/en/14053219 Best regards, Wizard

Suggestion To thank Quote Answer

6/5/2006 3:18 PM	Rate (0)
Late Platinum Expert Joined: 1/7/2006 Last visit: 2/16/2023 Posts: 2705 Rating: (311)	Hi, When you look on the Blocks-folder with the right mouse key and ask for the object properties the load-data is shown and alsothe work-data when you opens the tab "Blocks". [;)] The only thing thats not counted thereare the SDB-blocks, so you have to calculate those space also to the load and work memory [:(]
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on