Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Programming CP 528 with COMGRAPH

Created by: MISJO01 at: 11/26/2011 8:31 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

11/26/2011 8:31 PM	Rate (0)
MISJO01 Posts: 3 Rating: (0)	Dears I have a CP 528 for viaualising a chocolate machine. The Software COMGRAPH is working. My problem. I have not a manual for programming the CP 528 with COMGRAPH. I will change some text in the pictures but i don't now the way in the software. In a full graphic window i have change the text in a window. Next problem i must change some messages. Is one in here there can help me???
MISJO01 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

11/29/2011 2:27 PM	Rate (0)
Azteke0110 Posts: 376 Rating: (56)	Hello, Unfortunately, I do not have any documentation about of the CP 528. My recommendation is for you. Please try over the following way to get the information. Here the Link. http://support.automation.siemens.com/WW/view/en/16605069 Best regards Azteke0110
Azteke0110 Posts: 376 Rating: (56)
Suggestion To thank Quote Answer

11/29/2011 3:42 PM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 4/12/2023 Posts: 10221 Rating: (1176)	I would surprised if you find an info concerning CP528, specially how to do the required changes. Here only exist info for CP526. And you can take a look there. Perhaps might helps you. And to be a little bit offtopic, I suggest you to think about upgrade the system. Best regards, Hristo MIhalev

Suggestion To thank Quote Answer

11/29/2011 3:48 PM
IBN-Service Posts: 8946 Rating: (995)	MISJO01 Dears I have a CP 528 for viaualising a chocolate machine. The Software COMGRAPH is working. ... Is one in here there can help me??? Dear, My one and only suggestion: Throw it all away.
IBN-Service Posts: 8946 Rating: (995)
Suggestion Quote Answer

11/29/2011 4:54 PM	Rate (0)
BeVee Gold Member Joined: 7/18/2011 Last visit: 4/13/2023 Posts: 520 Rating: (88)	Hi MISJO01 I found a manual for you. Unfortunately it is in German language Take a look at this link https://support.automation.siemens.com/WW/llisapi.dll?query=ID%3A23773990&func=cslib.cssearch&content=adsearch%2Fadsearch.aspx&lang=de&siteid=cseus&objaction=cssearch&searchinprim=&nodeid99=&x=44&y=11 Kind regards, BV
	Last edited by: BeVee at: 11/29/2011 8:42 PM
Suggestion To thank Quote Answer

11/29/2011 5:17 PM	Rate (0)
MISJO01 Posts: 3 Rating: (0)	Dear Azteke0110 Thank you for your information. An upgrade is not possible at the moment. It will be replaced then the S5 115U has all its parts. Right now you only need few small changes. But now I am already so far that I can change the sub-images. The conditions is just typical Siemens. Best regards Misjo01
MISJO01 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

11/29/2011 5:31 PM	Rate (0)
MISJO01 Posts: 3 Rating: (0)	Dear BV Thank you for this link. Maybe I'll find the right documentation. Sorry, but i stay in a Hotel and my accu goes empty. I look tomorow here back. Best regards Misjo01
MISJO01 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on