Navigation

Programming problem

Created by: roelofdevcon at: 6/21/2022 8:03 AM (1 Replies)

6/21/2022 8:03 AM	Rate (0)
roelofdevcon Member Joined: 6/21/2022 Last visit: 4/5/2023 Posts: 1 Rating: (0)	Hi, I have a siemens logo 8 with a program on it. now i load a new program here and it works. If the logo has been off and then turns on again, the old program is back. no sd card is used. On another logo I have no problem where the same program comes up.
	Last edited by: Jen_Moderator at: 06/21/2022 12:22:44 Text edited.
Suggestion To thank Quote Answer

6/21/2022 8:10 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/1/2023 Posts: 31530 Rating: (3916)	I only know the error you describe when an SD card is used and the old program is stored on the SD card.

Suggestion To thank Quote Answer