12/1/2017 11:01 AM | |
Posts: 102 Rating: (10) |
hi huggy my installed path is default on C drive source of problem is installation of Wincc Pro v14 SP1 i reinstall it again and encountered error ... i make zip attach file with error and Data Log of installation file in attachment thanks for check it regard AttachmentNew folder.zip (761 Downloads) |
5/22/2018 2:39 PM | |
Posts: 70 Rating: (0) |
Hi, thanks for this response I have the same problem, i change the destination to the standard default location, but i still can't save the project. |
7/10/2018 10:58 PM | |
Posts: 2 Rating: (0) |
lords of siemens Can you help us with this error? I think you should already know how to correct it
|
9/7/2018 7:08 PM | |
Posts: 1 Rating: (0) |
Hi Wormus I'm also failed, I'm saved file at desktop and it ok goodluck |
8/15/2020 12:19 PM | |
Joined: 2/10/2017 Last visit: 10/10/2023 Posts: 53 Rating: (1) |
Way 2 works for TIA V16 as well. |
3/17/2021 11:58 PM | |
Joined: 9/27/2006 Last visit: 5/20/2024 Posts: 12257 Rating: (2668) |
Hello Frank; You really should look at the system requirements for the software you are working with, For example, look at the screenshot below showing thje oprerating systems for TIA Portal v12 SP1. WinCC v12 SP1 product note : https://support.industry.siemens.com/cs/ww/en/view/73947391 Step 7 Basic/Professional v12 SP1 product note: https://support.industry.siemens.com/cs/ww/en/view/76276623 You can chgeck v13 SP1 requirements by using the search box at the top right of this page, search for Step 7 v13 SP1 and WinCC v13 SP1, filter under Product Note. Hope this helps, Daniel Chartier |
This contribution was helpful to1 thankful Users |