Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

project simulating

Created by: Insausti at: 10/26/2006 10:41 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/26/2006 10:41 AM	Rate (0)
Insausti Posts: 150 Rating: (2)	i'm trying out a small example, setting and resting output, input and memory bits from a WinCC screen in runtime. For example, when i press a button an output in the PLC should light, but this is working so far with the PLC outputs, but not with the inputs and memory bits. The CPU i'm using is 314C-2 DP, could this be the problem???
Insausti Posts: 150 Rating: (2)
Suggestion To thank Quote Answer

10/26/2006 10:48 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, I guess that your question is closer to PLCSIM than to WinCC, so the moderator will move it to plc-themes... /tf/WW/en/Posts/2276 nemo
Nemo Posts: 3149 Rating: (171)	Last edited by: Nemo at: 10/27/2006 7:20 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on