Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PTO Outputs in 1214C DC/DC/DC

Created by: MINKU at: 5/15/2012 12:32 PM (2 Replies)

Rating (1)

Thanks 0

3 Entries

5/15/2012 12:32 PM	Rate (0)
MINKU Posts: 36 Rating: (0)	Hello I have CPU 1214C DC/DC/DC which have 10 solid state outputs out of which 2 outputs are for PTO at 100KHz, can i use remaining 8 outputs for PTO at 500Hz or 1KHz?? If yes then how can i use those8 outputs for PTO generation. Thanks and regards
MINKU Posts: 36 Rating: (0)
Suggestion To thank Quote Answer

5/15/2012 1:05 PM	Rate (1)
Marko Bursic Platinum Member Joined: 9/8/2009 Last visit: 1/20/2023 Posts: 1410 Rating: (146)	The answer I guess, is no. Else you would have 10 PTO outputs, not 2 as specified.

Suggestion To thank Quote Answer

5/15/2012 1:22 PM	Rate (0)
Gabriel de Oliveira Bronze Member Joined: 2/16/2011 Last visit: 9/15/2022 Posts: 229 Rating: (25)	MINKU Hello I have CPU 1214C DC/DC/DC which have 10 solid state outputs out of which 2 outputs are for PTO at 100KHz, can i use remaining 8 outputs for PTO at 500Hz or 1KHz?? If yes then how can i use those8 outputs for PTO generation. Thanks and regards Hello, Yes, you can use, but it will depend the scan time of the CPU, because this outputs only changes at process image. To have more precicion you can use the Cyclic's OB. But you have to do your own control (time pulse off, time pulse on, how many pulses) Regards
	Gabriel de Oliveira It Works? Rate It.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on