Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Pulse operated switch

Created by: allan1003 at: 3/17/2012 3:09 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/17/2012 3:09 PM	Rate (0)
allan1003 Posts: 15 Rating: (0)	Hello, Can anyone help I want to make a pulse operated switch with the S7-1200, I have no problem with the S7-200, how do i make the transition. Thanks Allan
allan1003 Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

3/19/2012 11:57 AM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/22/2025 Posts: 4396 Rating: (1464)	Hi, if I right understood the desired instruction is P_TRIG. You will need a auxiliary address to get the pulse..
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

9/23/2012 5:57 PM	Rate (0)
eng ahmed helal Posts: 1 Rating: (0)	HI here is the program i hope to help you Network 1 // Network Title // Network Comment LD I0.0 EU LPS AN M0.0 S M0.0, 1 LPP A M0.0 R M0.0, 1 Network 2 LD M0.0 = Q0.0 good luck
eng ahmed helal Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on