Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

pulse putput distance

Created by: Rajesh_s at: 1/7/2015 5:39 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/7/2015 5:39 AM	Rate (0)
Rajesh_s Experienced Member Joined: 10/20/2011 Last visit: 2/6/2023 Posts: 96 Rating: (3)	Hi, How much distance will configure in PLC 1214C PTO output to servo drive ? Distance between PLC and Servo drive ?

Suggestion To thank Quote Answer

1/7/2015 8:18 AM	Rate (0)
William_B Posts: 5225 Rating: (1160)	Rajesh_s Hi, How much distance will configure in PLC 1214C PTO output to servo drive ? Distance between PLC and Servo drive ? Hi. The distance you speak of is probably the distance of travel the physical system will have for each pulse from the PLC. That is specific to your system (physical and electronic). Since we do not know anything about your system, we cannot help more. Greetings. w
William_B Posts: 5225 Rating: (1160)
Suggestion To thank Quote Answer

1/7/2015 1:13 PM	Rate (0)
Rajesh_s Experienced Member Joined: 10/20/2011 Last visit: 2/6/2023 Posts: 96 Rating: (3)	sir, I am using 1214 DC/DC/DC CPU and FUJI servo drive.The distance between CPU & Servo drive is of 15metre distance.i am using PTO output for servo drive. Is it is possible to do or else if any loss of PTO Signals.

Suggestion To thank Quote Answer

1/7/2015 3:18 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (994)	Rajesh_s sir, I am using 1214 DC/DC/DC CPU and FUJI servo drive.The distance between CPU & Servo drive is of 15metre distance.i am using PTO output for servo drive. Is it is possible to do or else if any loss of PTO Signals. If you are using a shielded cable and do a propper grounding on both sides, 15m is absolute no problem.
IBN-Service Posts: 8946 Rating: (994)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on