Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

pulse train output

Created by: Sulung at: 11/20/2009 2:04 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/20/2009 2:04 AM	Rate (0)
Sulung Bronze Member Joined: 5/26/2007 Last visit: 9/3/2024 Posts: 127 Rating: (3)	Dear all, i need to genereate 2 variable pulse train from 0 - 100 kHz. please let me know how to do it (s/w and h/w). i have a panasonic servo drive that only receive pulse train. the amount of pulse determine the distance which is mostly fixed, and the pulse frequency is used to determine the speed of the drive which is variable depend on a conveyor speed.

Suggestion To thank Quote Answer

11/26/2009 12:57 PM	Rate (0)
Robster Gold Member Joined: 5/28/2008 Last visit: 9/11/2024 Posts: 1343 Rating: (141)	Sorry, don´t know how and if it works with S7-300. I can only give you help for S7-200 or 1200. But maybe anyone else who know about PTO with S7-300 ?

Suggestion To thank Quote Answer

11/29/2009 8:14 AM	Rate (0)
Ayman Elotaify Platinum Expert Joined: 5/28/2008 Last visit: 9/9/2024 Posts: 4515 Rating: (839)	Dear Sulung, This issue has been discussed from a while. See the following threads. Pulse Output (until 30 kHz) on S7-300 Pulse train output from 314C-2DP Regards,
	Ayman Elotaify
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on