Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Question about digital value in LWE

Created by: Matteo_sfc_ at: 8/31/2020 12:14 AM (2 Replies)

Rating (1)

Thanks 1

3 Entries

8/31/2020 12:14 AM	Rate (0)
Matteo_sfc_ Member Joined: 12/20/2017 Last visit: 9/22/2020 Posts: 2 Rating: (0)	Hi everyone. I have to use a digital value in LWE as a momentary push button, is that possible? Thanks in advance!

Suggestion To thank Quote Answer

8/31/2020 4:42 AM	Rate (1)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/6/2023 Posts: 31561 Rating: (3923)	No, the LWE does not (yet) provide this function. It should then be possible in the next version. But you can do it in the LOGO! program. Add a network input to the program, which should then have the function of the push button. And a network output with the same address. You connect the network output with a LOW block. The status of the network input becomes HIGH when you click on the digital value in the extended web server. The LOGO! reads the status of the network input, processes the program and then resets the program the network input with the LOW block. This means that the network input is HIGH for exactly one cycle. See attachement. Attachment Untitled.PNG (90 Downloads)

Suggestion To thank Quote Answer

8/31/2020 7:35 PM	Rate (0)
Matteo_sfc_ Member Joined: 12/20/2017 Last visit: 9/22/2020 Posts: 2 Rating: (0)	Hello ixo65. Thanks for the immediate reply and for the quick solution.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on