Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Question about X50

Created by: RithV at: 2/29/2020 8:34 AM (14 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

15 Entries

Entries per page: 10 | all

2/29/2020 8:34 AM	Rate (0)
RithV Posts: 13 Rating: (0)	How can I connect electronic circuit with 230RC X50 Siemens Logo. I already create a rain drop sensor using electronic device.. How can I make that sensor to be input in my program? It is possible or not?
RithV Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

2/29/2020 8:41 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 1/16/2025 Posts: 34498 Rating: (4306)	There is no LOGO! 230RC X50. X50 is the name for the mSD card slot. You haven't described what signal your electronic device outputs. You should first give precise information ....

Suggestion To thank Quote Answer

2/29/2020 8:53 AM	Rate (0)
RithV Posts: 13 Rating: (0)	I'm very sorry, My fault.my model number is6ED1052-1FB08-0BA0. this is my sensor
RithV Posts: 13 Rating: (0)	Last edited by: RithV at: 02/29/2020 08:55:04
Suggestion To thank Quote Answer

2/29/2020 9:01 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 1/16/2025 Posts: 34498 Rating: (4306)	No, you can't connect dirctly the sensor to your LOGO!. Your sensor has a power supply of 12VDC. You must use a opto coupler or a relay in your sensor circuit.

Suggestion To thank Quote Answer

2/29/2020 9:32 AM	Rate (0)
RithV Posts: 13 Rating: (0)	Can you suggest me what relay should I use?
RithV Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

2/29/2020 9:50 AM	Rate (0)
RithV Posts: 13 Rating: (0)	Can I have a diagram how to wiring from my my sensor output to input siemens logo?
RithV Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

2/29/2020 10:26 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 1/16/2025 Posts: 34498 Rating: (4306)	Here a wiring scheme. Attachment Rain Drop.pdf (281 Downloads)

Suggestion To thank Quote Answer

2/29/2020 4:51 PM	Rate (0)
RithV Posts: 13 Rating: (0)	How about the battery? just remove it? and If you don't mind I really need the exactly model of component that i should buy to connect this to my siemens logo :/ Can you help me? Please.
RithV Posts: 13 Rating: (0)	Last edited by: RithV at: 02/29/2020 16:53:36
Suggestion To thank Quote Answer

2/29/2020 4:57 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 1/16/2025 Posts: 34498 Rating: (4306)	Why do you want to remove the battery? That is the power supply for your sensor electronics and the new relay. If you want to remove the battery you have to provide another 12VDC power supply.

Suggestion To thank Quote Answer

2/29/2020 5:08 PM	Rate (0)
RithV Posts: 13 Rating: (0)	Yes. I'm using converter ac to dc power supply. So that drawing is for Siemens Optocoupler or else?
RithV Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on