Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

QUICK STOP in CEMAT V6.1

Created by: MODICON at: 7/26/2009 6:34 AM (8 Replies)

Rating (0)

Thanks 0

9 Entries

7/26/2009 6:34 AM	Rate (0)
MODICON Posts: 24 Rating: (0)	Hi, I am using CEMAT V6..Its group face plate has a QUICK STOP Icon which is on a single click. I want to make it like this way that if Operator click the Icon of QUICK STOP then a small window open and in which mentioned that " ARE YOU SURE TO QUCIK STOP YES OR NO. If Operator click on "YES" then a QUICK STOP operate and if he click on "NO" then this small windon closed. Please give a example that how I will do it. Thanks in Advance,
MODICON Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

7/27/2009 9:46 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Check how the CMD2Steps is implemented in the BinOp1 button (see @pcs7elements.pdl). This button is used in almost every standard PCS7 object.
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

7/28/2009 6:43 AM	Rate (0)
MODICON Posts: 24 Rating: (0)	Hi, Phantom75 Good morning, I could not understand your point.Please if possible give me a example to understand your point. Thanks in Advance,
MODICON Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

7/28/2009 8:19 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Hi MODICON, Have you used the MOTOR block (FB66) in PCS7? Open the faceplate PDL @PG_MOTOR_STANDARD.pdl for the MOTOR block. Check the properties of the Off and On buttons. There is a property called CMD2Steps. Check the button behavior in runtime when you set the CMD2Steps property to Yes and when you set it to No. Regards
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

7/29/2009 8:05 PM	Rate (0)
MODICON Posts: 24 Rating: (0)	Hi,Phantom75, Please check the attached file and guide me. Thanks in Advance, Attachment PCS PICS.zip (287 Downloads)
MODICON Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

7/30/2009 12:02 AM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Hi MODICON, You are on the right track! I want you to configure a MOTOR block (in CFCand OS). Then set CMD2Steps=Yes in the faceplate for On button and save the faceplate. Now in runtime when you click on the On button you'll notice an additional pop-up window "Are you sure?". Next step is make CMD2Steps=No and try to start the motor and there'll be no "Are you sure?" window. I believe this is exactly what you are looking for, right? I suggested this because I want you to study how this is done so that you can use this technique for the Quick Stop button. Can you manage all this?Let me know. Regards
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

7/30/2009 1:33 PM	Rate (0)
MODICON Posts: 24 Rating: (0)	Hi Phantom75, Good morning, Thanx for the early reply.I am a new user of CEMAT V6.1.It will be more better for me that if you kindly explain me with example.Also if possible send me some good links that help me for working CEMAT V6.1. Thanks & Regards,
MODICON Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

7/30/2009 3:27 PM	Rate (0)
Nil96 Posts: 325 Rating: (14)	Hi Modicon, What Phantom said is very correct. For better understanding have a look at the scripts --> PCS7_OpenInputBoxBin_V6 , PCS7_Binary_OK_V6. Also have a look at the pdl @PCS7_BedBinaer.pdl Probably once u understand these scipts, u would definelty get a gud idea so as how to implement Cmd2Steps. Hope this helps Regards Nil
Nil96 Posts: 325 Rating: (14)
Suggestion To thank Quote Answer

8/3/2009 6:48 AM	Rate (0)
MODICON Posts: 24 Rating: (0)	Hi Nil96, Thanx for the reply and you are very right that Phantom75 what said totally right.But as I am a new user of CEMAT V6.1 so I could not followed it completely. So if you explain it to me with example then it will be more help full for me. If possible send me some help full links for the CEMAT V6.1. Thanks in Advance,
MODICON Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on