Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

"SetLink" and "GetLink" in VBS

Created by: adp at: 4/26/2006 10:06 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/26/2006 10:06 AM	Rate (0)
adp Posts: 14 Rating: (0)	[:mad:]Hi to all, is there anyfunctions similar to C-script SetLink and GetLink in VBS? I just want to set dynamically a property to link to a tag. By using C-Script this is easy, but in VBS. In VBA I found that the command: [code]Dim objVariableTrigger As HMIVariableTrigger Set objVariableTrigger = objCircle.Top.CreateDynamic(hmiDynamicCreationTypeVariableDirect, "tagname")[/code][/code] as desctibed in VBA 58 and 59 examples, but they obviously works only during Graphic development. Thanks.
adp Posts: 14 Rating: (0)	Last edited by: adp at: 4/26/2006 10:07 AM
Suggestion To thank Quote Answer

4/26/2006 11:10 AM	Rate (0)
Jaapie Gold Member Joined: 1/17/2006 Last visit: 10/27/2023 Posts: 799 Rating: (63)	Hi adp, I do not think it is possible. Why do you not want to use C? Anyone?? Jaap

Suggestion To thank Quote Answer

4/26/2006 12:52 PM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (150)	I think Jaap is correct. You cannot do this in VBS, only C. Just to clarify, VBA is only for use with the configuration system and doesn't operate in WinCC Runtime. There are quite a lot of things VBA can do that VBS cannot [:(]

Suggestion To thank Quote Answer

9/24/2015 9:29 AM	Rate (0)
DirkMangelschots Member Joined: 3/19/2008 Last visit: 6/22/2023 Posts: 4 Rating: (0)	Still not possible after all this time?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Scripting

Follow us on