Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

r9492,r9491 questions

Created by: winterwang at: 1/18/2015 6:44 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

1/18/2015 6:44 AM	Rate (0)
winterwang Posts: 291 Rating: (1)	hello expert: the picture is r9491 and r9492. when i look the online help about the two parameters, it says:display the signal list(Binector input/Connector input,Bi/Ci)for the frist interconnections between this drive and other drives/drive objects? my question is: the picture is just a dispaly.where am i need to set them link together? and for example:r9491[0] interconnection to EOLxA20xTM54F:P10007.0,but actually the P10007 of the TM54F is set r2094.1 of CU320.so why the r9491[0] not link to r2094.1 instead of EOLxA20xTM54F:P10007.0? Attachment r9491,r9492.jpg (48 Downloads)
winterwang Posts: 291 Rating: (1)	Last edited by: winterwang at: 1/18/2015 6:45 AM
Suggestion To thank Quote Answer

1/18/2015 6:46 AM	Rate (0)
winterwang Posts: 291 Rating: (1)	and this is the TM54F's P10007 settig. Attachment TM54F.jpg (57 Downloads)
winterwang Posts: 291 Rating: (1)
Suggestion To thank Quote Answer

1/18/2015 7:51 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/2/2024 Posts: 22388 Rating: (3015)	Hi, is only the list an you mus not set any interconnection together. In you picture you see that you have a interconnection between the p10007.0 and the p2094.1. R9491 is IN Connection to other objects and 9492 are OUT Connection. Regards Christoph

Suggestion To thank Quote Answer

1/18/2015 9:22 AM	Rate (0)
winterwang Posts: 291 Rating: (1)	you mean i don't need to connect them ,it will automaticlly link , right? what you usually use r9492 and r9491 to do ?
winterwang Posts: 291 Rating: (1)
Suggestion To thank Quote Answer

1/18/2015 9:27 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/2/2024 Posts: 22388 Rating: (3015)	no, the connection is doing by yourself. the r9491/r9492 is only a "protocol" parameter with which you can see which interconnections are made to other drive objects in the actual object. the interconnections wheremade at other points, not in this parameters.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on