Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

RAM/ROM of PLC

Created by: Ahmed at: 4/1/2012 1:38 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/1/2012 1:38 PM	Rate (0)
Ahmed Experienced Member Joined: 2/20/2007 Last visit: 2/1/2023 Posts: 122 Rating: (2)	Dear all, During downloading the programming to CPU, are there any option in which we can download the program into RAM only,not in the ROM....so that after that power restart of CPU these changes will be erased. In short how can we select the options i.e RAM/ROM for downloading the program into desired memory. Regards Ahmed

Suggestion To thank Quote Answer

4/1/2012 6:13 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 4/12/2023 Posts: 10221 Rating: (1176)	Hello, Take a look at What is the effect of the STEP 7 function "Copy RAM to ROM"? Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on