Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

RCS802 Remote: Is there a way to switch modus MDA, AUTO, JOG

Created by: Yves_Belgium at: 7/2/2012 2:56 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/2/2012 2:56 PM	Rate (0)
Yves_Belgium Posts: 23 Rating: (0)	Like the subject says: is there a way when machine is remote controlled by RCS802 to switch the modus MDA, AUTO, JOG,....and maybe Cycle Start Maybe there´s a way acces the whole control panel? (It´s for writing parametric calculations to the memory)
Yves_Belgium Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

7/2/2012 5:34 PM	Rate (0)
Zub04 Bronze Member Joined: 7/15/2009 Last visit: 8/29/2024 Posts: 41 Rating: (1)	Hi, this is normally controled by PLC and from this reason you cann´t do this via RCS. You have only one possibility, try set appropriate PLC interface signal via HMI from PLC status. regards Attachment status_list.JPG (89 Downloads)

Suggestion To thank Quote Answer

7/2/2012 11:58 PM	Rate (0)
Yves_Belgium Posts: 23 Rating: (0)	Hi, i´ve just set my interface same like yourse... rebooted the control, and now what i do? Regards, Yves
Yves_Belgium Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on