Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

RD_SYS_T not matching CPU Time

Created by: Jch360 at: 4/24/2014 4:05 PM (2 Replies)

Rating (2)

Thanks 3

3 Entries

4/24/2014 4:05 PM	Rate (0)
Jch360 Posts: 22 Rating: (0)	I am trying to just read the time of the CPU, but have run into an issue with the time not matching. I have checked time zone, set time with PG and the CPU time is correct. When ever I use the RD_SYS_T to read the time it is 5 hrs fast. I did add the block before setting the time so I also removed block and readded once the time was correct. Anyone run into this issue and know how to solve it? I am using TIA portal V12 and my CPU is S7-1212C. Attachment C:\Users\hugginsj\Desktop\RD_SYS_T_Issue.jpg (351 Downloads)
Jch360 Posts: 22 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users CityofWindhoek

4/28/2014 2:44 PM	Rate (2)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 12/7/2023 Posts: 13989 Rating: (2282)	Jch360 I am trying to just read the time of the CPU, but have run into an issue with the time not matching. I have checked time zone, set time with PG and the CPU time is correct. When ever I use the RD_SYS_T to read the time it is 5 hrs fast. I did add the block before setting the time so I also removed block and readded once the time was correct. Anyone run into this issue and know how to solve it? I am using TIA portal V12 and my CPU is S7-1212C. You want to RD_LOC_T to localize the time returned.
	science guy
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users CityofWindhoek

5/2/2014 3:47 PM	Rate (0)
Jch360 Posts: 22 Rating: (0)	That worked perfect. Thanks!
Jch360 Posts: 22 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users 0_Einstein

|

Share this page:

Share this page on...

Follow us on