Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Read a merker bit whit a pointer

Created by: FABIO66 at: 10/20/2014 2:40 PM (3 Replies)

Rating (1)

Thanks 2

4 Entries

10/20/2014 2:40 PM	Rate (0)
FABIO66 Posts: 34 Rating: (0)	Hello to all. I'm very rusty in S5 and i need a help from community. I need to check the status of merker bit pointed by index. In other word : i have 10 merker byte ( from M150.0 to M159.7 ) by the use of a merker byte or merker word would like to read the status of a bit. for example my pointer is MB100 . If MB100 value is 1 , i would like read the M150.0 If MB100 value is2 , i would like read the M150.1 ... ... ... If MB100 value is9 , i would like read the M151.0 and so on . anyone can help me ? Thank you in advance
FABIO66 Posts: 34 Rating: (0)	Last edited by: FABIO66 at: 10/20/2014 2:42 PM Last edited by: FABIO66 at: 10/20/2014 2:41 PM
Suggestion To thank Quote Answer

10/20/2014 4:00 PM	Rate (1)
BeVee Gold Member Joined: 7/18/2011 Last visit: 4/13/2023 Posts: 520 Rating: (88)	Hello Fabio66 I think the following code will be pretty close. Kind regards, BV Attachment FB1@@@LS.zip (77 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users hdhosseini

10/20/2014 5:03 PM	Rate (0)
FABIO66 Posts: 34 Rating: (0)	Hey, i want to say thank you for your help. The code working fine !! FABIO
FABIO66 Posts: 34 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users BeVee

10/20/2014 7:20 PM	Rate (0)
BeVee Gold Member Joined: 7/18/2011 Last visit: 4/13/2023 Posts: 520 Rating: (88)	Hello FABIO66 I think there is a flaw in the code. I think the code won't work for odd MB like M 151.0. Did you try the code when the pointer is for e.g. 9 ? Kind regards, BV

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on