Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

read DB length

Created by: pici_c at: 4/12/2011 10:15 PM (1 Replies)

Rating (0)

Thanks 1

2 Entries

4/12/2011 10:15 PM	Rate (0)
pici_c Posts: 80 Rating: (2)	Hi all! I haven't fount anysolution for my problem: I want to read somehow the length of one of my DBs. Is there an SFC or instruction that can give it to me? thanks
pici_c Posts: 80 Rating: (2)
Suggestion To thank Quote Answer

4/13/2011 1:30 AM	Rate (0)
fritz Diamond Expert Joined: 10/7/2005 Last visit: 5/30/2023 Posts: 2966 Rating: (1025)	pici_c I haven't fount anysolution for my problem. You weren't looking in the right place dear pici_c a quick search for "DB lenght" at https://support.automation.siemens.comreveals THIS solution. I hope this helps
	Cheers fritz The advice and opinion given in this thread is that of the author and does not necessarily reflect the views of I S Systems Pty Limited. To find out how I S Systems can help you with your automation needs please visit www.issystems.com.au.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Chilly_Garfield

|

Share this page:

Share this page on...

Follow us on