Read HW Config from MMC

Dear all,

Firstfully, my main hardware is 315-2DP and 2 SIMOREG.

Is it possible to read HW Config from MMC? because i have try to upload normally from MPI and PROFIBUS port but there's a message. it said "error when uploading hardware configuration", then the result is no SIMOREG connected. though there 2 SIMOREG already connected to profibus port.

or do you know why that message can appear? i have try upload with my PG and PC ADAPTER but the result is still same.

Thanks in advance,

sorry, i dont remember the error code but i'm sure the error doesn't mentioned in your suggested link.

then.... is it possible to read HW Config from MMC?

Darius

...you have "system data" and this should be enough to download to new cpu, ...

Aret

System data is not all you need. For example bus parameters for each port are stored not in system data as far as i know.

while interpreting SDBs uploaded from the module an error was recognized in the PD...