Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Reading/writing time from a timer to a display

Created by: atrygg at: 11/20/2009 3:26 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/20/2009 3:26 PM	Rate (0)
atrygg Posts: 1 Rating: (0)	I have a small problem that I think can be easely solved but I don't know how. When I read and write timervalues from a panel KTP100PN then I got only the value in msek, I would like to have it in sek or minutes. Is ther an easy way to do this, or do I need to do a calculation in the PLC, If anybody have any example it would be very appreciated. Best regards Anders
atrygg Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

11/23/2009 11:10 AM	Rate (0)
The Body Gold Member Joined: 5/13/2008 Last visit: 12/18/2019 Posts: 836 Rating: (71)	Hi atrygg, I found this FAQ, it might help a bit: http://support.automation.siemens.com/WW/view/en/23992560
	mfG / Best regards Roland
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on