Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Recieving E-mail with VBS script

Created by: Macolina at: 6/27/2008 12:06 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/27/2008 12:06 AM	Rate (0)
Macolina Posts: 3 Rating: (0)	I am working on project in which I have to send and receive sms from scada to mobile phone. I've done sending with VBS using MScomm control and AT commands, like you done in your code (Send E-mail with VBS script), but I' am not sure how to do receiving. Problem that I have is, how to extract text of sms from received message. I would appreciate any help. If somebody have VBS or VB code it would be very helpful to me. I am using WinCC and Wavecom Fastrack modem, conected on PS by rs232 port. Thanks
Macolina Posts: 3 Rating: (0)	Last edited by: CS Moderator at: 6/30/2008 4:23 PM new subject after splitting refered thread inserted
Suggestion To thank Quote Answer

6/30/2008 4:23 PM	Rate (0)
Macolina Posts: 3 Rating: (0)	Hello, I try to use your code for sending sms, but I found some problems with those lines Do buffer = buffer & SMSSend.Input Loop Until InStr(buffer, "OK") This doesn't work at me, so I didn't use those lines and I sent my messages sucesfully. But now, I don't know how to receive sms. I have problem accesing Com port from VBS with line SMSSend.Input. Any help, anybody?
Macolina Posts: 3 Rating: (0)	Last edited by: Macolina at: 6/30/2008 4:25 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on