Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

RECIPE NOT TRANSFERED TO PLC. ERROR MAILBOX

Created by: Ashish Vasavir at: 1/1/2011 1:56 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

1/1/2011 1:56 PM	Rate (0)
Ashish Vasavir Experienced Member Joined: 2/8/2009 Last visit: 8/6/2022 Posts: 56 Rating: (3)	HI ALL I had convert op7 project (priviously configureed in protool) in to op77b (now i use WinCC Flexi 2008). it convert sucessfully. now OP77B is communicating with S7-200 PLC. but when I am going to download RECIPE from HMI to S7-200 PLC it give me error "Transfer not Possible. reset Your PLC mailbox memory". and recipe is not transfering to PLC.

Suggestion To thank Quote Answer

1/3/2011 8:58 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 1/31/2023 Posts: 8586 Rating: (1122)	Dear danny_ash, Perhaps this link might help: WinCC flexible: Engineering with Recipes Using Integrated Functionalities It looks you have to unlock Datamailbox in PLC. Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on