Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Recipe referring to recipe

Created by: adam_ski at: 4/9/2010 9:31 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/9/2010 9:31 PM	Rate (0)
adam_ski Bronze Member Joined: 4/9/2010 Last visit: 12/28/2022 Posts: 215 Rating: (29)	Hello, I'm a new 1200 user converting from 200. In S7-200 I had recipes on memory cartridge for in-line blending process. Here is a simplified version: Recipe 1 (100 records, over 3000 bytes) containingliquid name and SG of various liquids. Recipe 2 (100 records, over 8000 bytes) containingdata of formulas each using 2 to 5 various liquids: formula name, liquid number for line1, mass flow rate for line 1, liquid number for line 2, mass flow rate for line 2, etc. When operator changed the formula the program would read corresponding Recipe 2 record and use liquid number from it to indirectly address liquid data record in Recipe 1. Can I do the same in 1200?

Suggestion To thank

4/12/2010 8:46 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 1/20/2023 Posts: 2685 Rating: (135)	Thread closed, because question is already discussed in the following thread Recipes in S7-1200. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on