Hello,

Your right. It was not good till v13sp1. As i mentioned in earlier post, this issue got resolved in V14. 

Hello moose,

We understand your point and this is why we try to help you.

A workaround is a strategy to overcome a problem in a system, which is actually the case with V13, not V14.

Older TP were configure via WinCC flexible which is not the same as TIA.

TIA offer you greater benefits overall.

At this point, you can go to V14, use workaround and move forward or open a support request to send a message to Germany software programmers.

Have a good day!

Best regards,

Hugo

Hello Hugo,

Like I said, tried in V14 Upd1, no change, scroll-bar still not visible on screen lay-out.

But thanks for your input for the problem.

Sometimes I think that the priorities in software development are shifting from practical view to ICT C++/# /.NET developers view. A database function becomes more important than an AND box...

Regards,

Moose 

moose

Hello Hugo,

Like I said, tried in V14 Upd1, no change, scroll-bar still not visible on screen lay-out.

But thanks for your input for the problem.

Sometimes I think that the priorities in software development are shifting from practical view to ICT C++/# /.NET developers view. A database function becomes more important than an AND box...

Regards,

Moose 

Hello,

Everything is good on my side with V14.

Best regards,

Hugo

Hello Hugo,

Here still not OK with the slider, version is V14.

In edit  / developer mode slider is OK but not in runtime, slider becomes small vertical line.

Regards,

Moose

Hello Hugo,

This is snapshot of edit mode.

Gr.,

Moose

Hello moose,

As shown in my previous printscreen, go to "Properties" > "Properties" > "Appearance" and uncheck "Display status bar".

It works here and I don't understand why it would not with yours. (even on the HMI or with runtime)

Best regards,

Hugo

Hello Hugo,

Sure I have unchecked Statusbar.

My example was PC runtime, it maybe different from HMI TP runtime.

Will try with HMI RT.

Gr.,

Moose

Hello Hugo,

Wit TP900 simulation Slider still not OK.

Small line on the right side, no difference when I EDIT the Recipe layout and move the value colum to the left, as soon as I leave the edit mode the value field with jumps back to the right and leaves no room for slider.

Anyway, no more time for experimenting, work is calling.

Thanks.

Moose

Hugo,

Another screen dump.

Gr.,

Moose