Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Red cross appear on my Batch Launch Coordinator

Created by: JCT at: 12/10/2012 10:10 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

12/10/2012 10:10 AM	Rate (0)
JCT Posts: 8 Rating: (0)	Hello, Have any one who has the same stituation, red cross on the Batch Launch Coordinator, like me after downloading the Batch data. I saw an error appear in server application status as attached. My operating system is windows7 ultimate 64 bit and PCS7 v8.0 update1 installed onthe laptop. Thanks! Attachment Batch Status.jpg (110 Downloads)
JCT Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

1/2/2013 12:59 PM	Rate (0)
Silent Bob Posts: 836 Rating: (100)	Hi, have you solved the problem?
Silent Bob Posts: 836 Rating: (100)
Suggestion To thank Quote Answer

3/12/2013 12:24 PM	Rate (0)
JCT Posts: 8 Rating: (0)	Dear expert, not yet
JCT Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

3/14/2013 3:42 PM	Rate (0)
Silent Bob Posts: 836 Rating: (100)	Hi, I was asking a colleague according this problem. He told me you should check following: - Check in the Siamtic Shell if you selected the correct terminal adapter. - Check the settings for redundancy (don't use COM wich isn't allowed for batch). - Check if the terminal adapter is on the first position in the extenden options. - Check if the terminal adapter has a correct IP address, wich is very important even on single stations because even lokal communication goes through the adapter.
Silent Bob Posts: 836 Rating: (100)
Suggestion To thank Quote Answer

3/15/2013 1:23 AM	Rate (0)
JCT Posts: 8 Rating: (0)	Dear Expert, Thank you very much for your help. I will check it.
JCT Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on