red memory card for Logo! 0BA8

good morning. how can we transfer a locked program
with a memory card to a Logo! 8? 
(like red memory card)

ixo65

You must save the LSC program as a binary dump on your HDD.
File > Save as > Binary dump (*.bin).

LSC sets the only allowed file name (LOGO_U_P). So you save a file named "LOGO!_U_P.bin).

After saving you must copy the file from the HDD to the mSD.

Switch off the power of the LOGO!, insert the mSD card and switch power on.

By the restart the LOGO! load the program from the mSD card and store in its program memory.

 thank you very much

ixo65

What do you mean with "red memory card"?

Mean you the memory cards of older LOGO! (e.g. 0BA6)?

If yes, then have you no chance.

No, I would just like to send a program. with memory card. the program is locked. was done the way you indicated to me.
Thank you very much.

ixo65

The only thing that confused me was the term "red memory card" because the LOGO! 0BA8 there is no "red memory card" but an mSD card. 

My problem remains. It does not provide me with security.
The Logo! now works without the card.
So the client can copy the program to many devices.
My goal is the following.
The program works only with the memory card.
I do not want to be able to copy the program.
thanks ​

ixo65

There's no way.

After a restart, the LOGO! copies the program from the mSD card to the internal program memory. The mSD card can then be removed again because the program has been copied to the internal program memory. It remains there until it is deleted or a new program is transfered.

The function that the LOGO! only works with a program on mSD card does not exist.

 ok

thank you again.

Danke schön

ευχαριστω πολυ.