Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Redundant S7-300

Created by: yakin28 at: 4/22/2010 9:48 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/22/2010 9:48 AM	Rate (0)
yakin28 Posts: 3 Rating: (0)	Hi There, I'm looking for some guidance. Can I use s7-300 315-2DP cpus (2 off)connected to a ET200 I/O nest and also 2 redundant mp377 Touch Screen HMI screens in a fault tolerant redundant system. The system that I am looking to install is for an alarm system within an installation. All alarms will be inputed to the ET200 I/O nest (analogue, digital inputs). Need the system to work so that if one cpu drops out, the other cpu will automatically pick up and also have both MP 377 screens operational and any one time, no matter what cpu is running. I believe there is a software package called software redundancy that you can use for this, is this correct. Also how would I setup the network for the above task. Rgds Chris
yakin28 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

4/23/2010 4:49 PM	Rate (0)
Hike Posts: 138 Rating: (0)	Yes there is a package of software redundancy. You can use it. As far as HMI is concerned this will help u
Hike Posts: 138 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on