Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Redundant Servers with ethernet H1

Created by: alfie at: 7/29/2008 8:10 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/29/2008 8:10 AM	Rate (0)
alfie Posts: 78 Rating: (3)	hi, I have 5 S5 PLCs connected to wincc via S5 ethernet layer 4 with cp1613 and H1. and I have 3 clients connected to this server via normal ethernet tcpip RJ45 port. so I want to configure redundant server for this configuration, I have done redundant configuration before with s7 plcs, but NOT with H1! what do I do?? should I define the same TSAP job in CP1430TF for this new server and new MAC address or there is anothere way?? Best regards, /Alfie
alfie Posts: 78 Rating: (3)
Suggestion To thank Quote Answer

8/11/2008 9:59 AM	Rate (0)
alfie Posts: 78 Rating: (3)	helooo, Can anyone help me??!!
alfie Posts: 78 Rating: (3)
Suggestion To thank Quote Answer

11/16/2015 10:36 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by rk5989 is split to a separate thread with the subject How to redundant server configure in PCS7?. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Installation Options General

Follow us on