Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Referncing Axis with Increemental encoder

Created by: maxymayank at: 12/27/2012 11:08 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/27/2012 11:08 AM	Rate (0)
maxymayank Posts: 7 Rating: (0)	Hi all, I M having CNC with 840D controller. Its Y axis Scale is faulty and I want to run the machine on encoder only. So i changed the parameter 30240 to 1 and Also checked the bit DBX32.dbx1.5 and 1.6. It is also Ok. Now machine is not showing any alarm but the problem is axes lost its refernce position . Also i tried to restore it by chnaging 34210 to 1 and then pressing + key in JOg + reff mode. It is not woking as encoder is increemental. So i want to know the detailed procedure to rfernce axis if sclae is bypassed. Thanks in advance
maxymayank Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

12/27/2012 11:14 AM	Rate (0)
MBA Gold Member Joined: 3/19/2006 Last visit: 4/29/2024 Posts: 594 Rating: (78)	https://www.automation.siemens.com/doconweb/content.asp?item=8085&cd=sinumerik_sinamics_04_2010_e&scope=all

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on