Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

REGISTER EVENTS - HELP ME

Created by: danieleborsari at: 7/9/2007 10:06 AM (3 Replies)

Rating (1)

Thanks 0

4 Entries

7/9/2007 10:06 AM	Rate (0)
danieleborsari Posts: 7 Rating: (0)	hi, I need some suggestion about register Event on Operation List (I suppose). My problem is: I need to register some operator actions which are not alarms but for example changing status motor from AUTO to MANUAL mode, some Set point changings....and so on. I need to configure Operation List? if it's so, how I can configure it to show in Runtime these changes? thanks
danieleborsari Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

7/9/2007 2:48 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, which Software do You mean? WinCC WinCC flexible Protool April
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

7/9/2007 4:03 PM	Rate (0)
danieleborsari Posts: 7 Rating: (0)	sorry WinCC 6.0 thanks
danieleborsari Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

7/9/2007 5:53 PM	Rate (1)
Nemo Posts: 3149 Rating: (171)	Hi perhaps this FAQ can help? http://support.automation.siemens.com/WW/view/en/24325381 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on