Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

remote control S7-1200 ?

Created by: alvr at: 5/25/2013 7:22 PM (7 Replies)

Rating (0)

Thanks 0

8 Entries

5/25/2013 7:22 PM	Rate (0)
alvr Posts: 21 Rating: (0)	Hello, I have no experience with remote control CPU of S7-1200 system. I would like to remote control this system through internet. I mean at least download/upload new procect to CPU or monitoring. Suggested system should be independent to difficult setting of LAN net at the final destination, etc. Could anybody recomend me some reliable solutions, please? Thank you!
alvr Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

5/26/2013 9:07 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/24/2025 Posts: 4397 Rating: (1464)	Hi, there is many possibilities. But first of all you should specify if you intend to do just a service functions (uploads, downloads, monitoring) or also telecontrol functions (operate the device remotely). Second you should decide with telecom media you will use: telephone, mobile telephone (e.g. GPRS) or internet. Possibile deivces are TS Adapter;CP1242-7, SCALANCE S, SCALANCE M. You can use internet and standard routers, but you should perform some configurations for connectiviy / safety (a safety VPN should be interesting).
	Last edited by: Pegaia at: 5/26/2013 9:10 PM Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

5/27/2013 9:05 AM	Rate (0)
alvr Posts: 21 Rating: (0)	I need service functions (up/download, monitoring) mainly. And it can be connected through internet for the most cases. Or GSM ways if there will not be internet connections on the final places. I am looking for cheap and reliable solutions. I have saw and tried instructions for remote access through router port forwarding (port 102) to CPU, but it did not work yet...I dont know where can be misstake? I am using TIA v11 and I still dont see any accessible device in TIA. Do you know any examples, documents, links for this situation? Thank you very much!
alvr Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

5/27/2013 12:17 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 1/24/2025 Posts: 1523 Rating: (230)	alvr I need service functions (up/download, monitoring) mainly. And it can be connected through internet for the most cases. Or GSM ways if there will not be internet connections on the final places. I am looking for cheap and reliable solutions. I have saw and tried instructions for remote access through router port forwarding (port 102) to CPU, but it did not work yet...I dont know where can be misstake? I am using TIA v11 and I still dont see any accessible device in TIA. Do you know any examples, documents, links for this situation? Thank you very much! Hello alvr, Have a look at one of the cost effective yet module TeleService solution - New TeleService Adapter IE Basic Released for Delivery
	Like it? Rate it!
Suggestion To thank Quote Answer

5/27/2013 12:41 PM	Rate (0)
BryanG2001 Posts: 113 Rating: (22)	http://www.ewon.biz/en/home.html
BryanG2001 Posts: 113 Rating: (22)
Suggestion To thank Quote Answer

5/27/2013 1:04 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/24/2025 Posts: 4397 Rating: (1464)	Hi, a "just" port forward has some limitations. The main is security. After mutch "headcakes" I was convinced that the right way is VPN. VPN should be more or less complex to build (with SCALANCE S it is relactive easy), but the costs/beneficts justify it.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

11/11/2013 11:19 PM	Rate (0)
pyrros Posts: 1 Rating: (0)	Hello, i activated the port forwarding in the router throuhg port 102 But what must i do in the PC where is installed the TIA. Must i change something in settings of TIA or just in my PC. I dont know how i can "see" the remoted PLC from my PC. Thanks in advance
pyrros Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

11/17/2013 3:21 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 1/24/2025 Posts: 1523 Rating: (230)	pyrros Hello, i activated the port forwarding in the router throuhg port 102 But what must i do in the PC where is installed the TIA. Must i change something in settings of TIA or just in my PC. I dont know how i can "see" the remoted PLC from my PC. Thanks in advance Hello pyrros, After Port Forwarding if you are able to communicate two PCs using the Static IP address, then the same is applicable for PLCs. There is nothing at the TIA Portal other than the router IP address which you set for the CPU. Hope this helps.
	Like it? Rate it!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on