Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Removal of SFC's from MMC

Created by: Ferdinand at: 11/29/2006 10:52 AM (3 Replies)

Rating (2)

Thanks 0

4 Entries

11/29/2006 10:52 AM	Rate (0)
Ferdinand Posts: 7 Rating: (0)	All, I want to remove unused SFC's from an S7-300 MMC card, how can i do this? The card seems full with them, how did they get there? they're not part of my current project! The only possibility i can think of is that i have selected 'select all', for OB's in the step7 V5.2 blocks part of the project wizard one time. Thanks in advance. Ferdi.
Ferdinand Posts: 7 Rating: (0)	Last edited by: Ferdinand at: 11/29/2006 11:03 AM
Suggestion To thank Quote Answer

11/29/2006 11:20 AM	Rate (0)
Smurf Silver Member Joined: 9/28/2005 Last visit: 12/14/2022 Posts: 414 Rating: (28)	Hi, If you have an external prommer or a Field PG you can delete all data on from the MMC and after that copy only the necessary files to the MMC.
	Smurf "The only difference between a problem and a solution is that people understand the solution."
Suggestion To thank Quote Answer

11/29/2006 11:52 AM	Rate (2)
Chris Silver Member Joined: 8/31/2005 Last visit: 7/24/2024 Posts: 217 Rating: (41)	Hi! System functions like SFCs or SFBs are part of the operating system of the PLC. They are not stored on the MMC. The SFCs or SFBs you see in your block folder of your STEP 7 project are only providing the interface to program with (they have no size, as you can see in the block folder).
	Greetings, Chris
Suggestion To thank Quote Answer

11/30/2006 5:14 PM	Rate (0)
Ferdinand Posts: 7 Rating: (0)	Thank-you for the useful and informative replies[:D] Ferdi
Ferdinand Posts: 7 Rating: (0)	Last edited by: Ferdinand at: 11/30/2006 5:14 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on