Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Replace ACCOS PLC with S7300

Created by: inisysAfrica at: 2/4/2009 7:48 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/4/2009 7:48 PM	Rate (0)
inisysAfrica Advanced Member Joined: 2/7/2008 Last visit: 9/13/2024 Posts: 15 Rating: (0)	Hi All, I would like to replace an APV ACCOS CPU with a S7300 CPU but would need to keep the ACCOS IO Modules for commercial reasons. Is there an Interface Module or any other way that I can use to communicate to ACCOS IO. NOTE: ACCOS PLC's were brought out by APV (now Invensys)for use in the Dairy and Beverage industries. Thanks
	Last edited by: smity at: 2/11/2009 4:15 PM ACCOS PLC is an A31P Last edited by: smity at: 2/11/2009 4:02 PM Have I put this question in the wrong section?
Suggestion To thank Quote Answer

2/19/2009 8:33 PM	Rate (0)
Woodman Posts: 1 Rating: (0)	Smitty I'm an ex APV automation engineer (23 yrs) and have put in many ACCOS installations. If you would like to discuss your application I would be happy to help you. Contact me at ipacs@charter.net. Thanks. Bryan
Woodman Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

2/28/2009 10:22 AM	Rate (0)
inisysAfrica Advanced Member Joined: 2/7/2008 Last visit: 9/13/2024 Posts: 15 Rating: (0)	Thanks, Bryan I will contact you next week Steve

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on