Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Replace CU

Created by: MovingCargo at: 9/9/2011 11:26 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/9/2011 11:26 AM	Rate (0)
MovingCargo Posts: 5 Rating: (0)	Thanks for Your answer. This is what i was thinking. Next question: I have serial product, where Starter - projects stays same with some small changes between projects. (speeds, ramps, torque limits, current limits etc...) Now if I want to replace old CU320 to new CU320-2, do I have to make hole project, or is there any way to replace CU to existing project? CF - card in CU 320-2is with different FW, but what happends if I try to download existing projct to new type CU? I look manuals etc, from Product support - sites, but i didnt find any topics about that issue.
MovingCargo Posts: 5 Rating: (0)	Last edited by: Blue Moderator at: 09.09.2011 11:59 splitted from /tf/WW/en/Posts/62900#top and renamed
Suggestion To thank Quote Answer

9/9/2011 2:36 PM	Rate (0)
DenisMor Posts: 344 Rating: (50)	New CUs use different firmware: 4.3 and higher. There is an option in Starter to upgrade the project from 2.x to 4.3 version of firmware automatically.
DenisMor Posts: 344 Rating: (50)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on