Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Replace power module

Created by: Maged Saad at: 5/9/2018 8:06 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/9/2018 8:06 PM	Rate (0)
Maged Saad Advanced Member Joined: 5/31/2012 Last visit: 1/4/2024 Posts: 23 Rating: (0)	I have damage power module with part no : 6SL3210-1SE12-0AA0 can i replace this damage with the following : 6SL3210-1SE13-1UA0 and which parameter i will need to change if i replace it

Suggestion To thank Quote Answer

5/10/2018 4:54 PM	Rate (0)
Maged Saad Advanced Member Joined: 5/31/2012 Last visit: 1/4/2024 Posts: 23 Rating: (0)	Maged Saad I have damage power module with part no : 6SL3210-1SE12-0AA0 can i replace this damage with the following : 6SL3210-1SE13-1UA0 and which parameter i will need to change if i replace it Please could someone help

Suggestion To thank Quote Answer

5/15/2018 7:25 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 10/9/2024 Posts: 5910 Rating: (806)	Hello Maged Saad, If the parameters are saved by the STARTER tool, you can download them with out any problem to the new drive even it is a little big larger. Converter specific settings are changed automatically. More to put in consideration is the old inerter in unfiltered, whereas the new one is filtered: This is not allowed if your supply is an isolated one (IT-Supply). It can damage the device. This might cause problems with very long cable lengths, longer than specified in the catalogue.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

6/4/2018 1:09 PM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	New question published by DavidBrown is split to a separate thread with the subject What is then the right procedure to get all parameters wright after exchanging the powermodule?. Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on