Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Replace tp27 10"

Created by: Garii at: 12/12/2011 8:08 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/12/2011 8:08 AM	Rate (0)
Garii Posts: 3 Rating: (0)	Dear experts the middle part of TP 27 10' (6av3627-6ql00-1bc0) is disabled and i have to replace it. Would you please answer my questions. 1- I want to backup with prosave 6.0 butby pressing the serial transfer incomming up the TP i can not access tothis section and the main program of machine is run. How can i backupfrom this TP? 2-What kind ofnew TP can i replace withthisTP. 3-Is it possible to restore to the TP27 (6av3627-1ql00-0ax1) Best regards David
Garii Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

12/12/2011 9:27 AM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 7/12/2023 Posts: 10221 Rating: (1177)	UMENCHO You should use serial RS232 (6XV1440-2K..) or RS232/TTY and to put the panel in transfer mode. In case of TP27, wrote: In the startup phase of the Touch Panel In the startup phase of the Touch Panel, the menu illustrated in figure 13-2 or figure 13-3, as appropriate, appears briefly in the initialization phase. Touch the SERIAL DOWNLOAD button to set the Touch Panel to Download mode before power up. Providing the download operation to the Touch Panel has not started, you can exit the Download mode by touching the BOOT CONFIGURATION button to continue the boot operation. More info you can find at TP27 manual. Is it possible to restore the backup on other MLFB number? To be nonest I don't think so. But if you have it on hand you can try it. About replacement you could use panels of 270 series or panels of 170 series (TP/OP177 PN/DP)- I´d recommend the 270 series...it depends from type of CPU and connection there. Best regards, Hristo MIhalev

Suggestion To thank Quote Answer

9/19/2016 10:26 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4792 Rating: (123)	New question published by udner is split to a separate thread with the subject Replace tp27-10 with tp270-10. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on