4/20/2012 2:16 PM | |
Joined: 3/18/2008 Last visit: 12/8/2023 Posts: 1750 Rating: (270) |
Dear All, is it possible to replace CP1413 Card with CP1613 Card? Thanks in Advance. |
VANDE MATARAM..... |
|
4/20/2012 2:46 PM | |
Joined: 7/18/2011 Last visit: 10/9/2023 Posts: 521 Rating: (90) |
Hi Amit_86 I think this thread contains the answers for your question. Kind regards, BV |
4/29/2012 6:25 PM | |
Joined: 12/22/2006 Last visit: 1/25/2022 Posts: 1742 Rating: (306) |
Hello everybody, Some previous responses made the confusion with the CP1430 that is a Simatic S5 card (successor of the CP535). The CP1413wasa PC Card thatwas fitted in an ISA slot of the PC Because ISA slotswere not available in new PCs, the CP1613 was introduced. See: http://support.automation.siemens.com/WW/view/en/4246763 The CP1613 is howeverfits only in aPCI slot. Conclusion: You cannot just pull the CP1413 and place a CP1613 in the same slot. |
Best regards |
|
This contribution was helpful to3 thankful Users |
4/29/2012 6:31 PM | |
Posts: 1064 Rating: (72) |
that is exactly my mistake thank you for the clarification |
This contribution was helpful to1 thankful Users |
4/30/2012 4:04 PM | |
Joined: 3/18/2008 Last visit: 12/8/2023 Posts: 1750 Rating: (270) |
HelloJKLM, Thanks for all important link and information. Well, I know that CP1413was previously hooked up on ISA Slot and Because ISA slotswere not available in new PCs, the CP1613 was introduced. Now letus say i am replacing PC withCP1613 Card and on S5 side i am not changing anything thenis it work? My Clientis not intersted to change anything on S5 PLC Sidesince the Plant is running without any problem and they have enough spare for S5 PLC. But letus sayin futureif problem comesin running PC then it is diificult toarrnage such old PC with ISA Slot. I hope now everbody understood my requirement. Thnaks inAdvance. |
VANDE MATARAM..... |
|
4/30/2012 4:36 PM | |
Joined: 12/22/2006 Last visit: 1/25/2022 Posts: 1742 Rating: (306) |
Hello, I found this FAQ Change over from CP 1413 to CP 1613 Under Windows NT 4.0 http://support.automation.siemens.com/WW/view/en/4246981 |
Best regards |
|
This contribution was helpful to1 thankful Users |
5/1/2012 8:47 AM | |
Joined: 12/1/2009 Last visit: 3/31/2024 Posts: 672 Rating: (147) |
Dear Amit_86 , sooner or later weall will face similar problem as you. Computers needs to be replaced, while the S5 systems are still running fine. And if the client does not want to upgrade his S5 we have to look into other options. Old PC hardware should be available on the market, but very difficultto finditin NEW condition. And if you replace the PC with a new, some hardware componentsor software driver will not work with it. In some cases a new machine with a VM might solve your problem. But if it comes to specific interface cardsit will not. Please let us know how you solved your problem. Btw. what applications are you running on the PC? Regards. |
Give us your feedback and show us your respect! |
|
Follow us on