Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

replacement of sinamics dcm with simoreg D (installed on cnc machine having sinumrik control system 840 c controller)

Created by: Sallo at: 7/2/2013 8:43 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/2/2013 8:43 PM	Rate (0)
Sallo Posts: 8 Rating: (0)	Hi ExpertsI need help in commissioning of sinamics dcm drive on cnc machine having siemens sinumerik control system 840 c controller.the machine so called Lathe machine 16 meter.It has two mode 1. turning modein this mode the drive work as a spindle2. milling modein this mode the drive work as c-axisi have successfully commissioned drive in turning mode. i need help in commissioning in milling mode so the drive will work as c-axis.please suggest.thanks
Sallo Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

7/2/2013 9:23 PM	Rate (0)
DenisMor Posts: 344 Rating: (50)	You may want to post this question in SINUMERIC CNC Automation Systems forum.
DenisMor Posts: 344 Rating: (50)
Suggestion To thank Quote Answer

7/4/2013 7:57 AM	Rate (0)
Sallo Posts: 8 Rating: (0)	Hi Denis, Yes I would like to share this issue onSINUMERIC CNC Automation Systems forum. Urgent response shall be highly appreciated.
Sallo Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on