Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Request software for Sinumerik 820M

Created by: Wesatec at: 10/10/2012 12:06 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/10/2012 12:06 AM	Rate (0)
Wesatec Posts: 7 Rating: (0)	Hi! We need some software for our ancient CNC. Any help is welcome! CNC was not in operation since 1 year. Battery was empty. We installed a new Battery but there is a error as you can see in photo. Immediately after starting , the display shows the following message: „Falsche ASM –Kennung „ How can I fix this? Attachment error.jpg (67 Downloads)
Wesatec Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

10/11/2012 7:45 AM	Rate (0)
MBA Gold Member Joined: 3/19/2006 Last visit: 4/29/2024 Posts: 594 Rating: (78)	why you do not answer in the German forum there you have already asked 1 month ago and got answers

Suggestion To thank Quote Answer

10/11/2012 10:29 AM	Rate (0)
Wesatec Posts: 7 Rating: (0)	Because. We need software not manuals. Perhaps it is a misunderstanding...
Wesatec Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

10/11/2012 2:07 PM	Rate (0)
Pee El Sea Gold Member Joined: 1/19/2008 Last visit: 10/2/2024 Posts: 992 Rating: (64)	Hi, Have you been into initial clear mode and reformatted the memory areas and tried to reload the ASM ? Not many manufacturers stored the ASM on the eprom module so you really need back ups. The software you require is specific to your machine and the 820 control. The chances of finding somebody with the same machine and control system as you have is not good. Pee

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on