Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Reset/Delete Alarmarchive One time

Created by: OmegaProjects at: 9/10/2009 2:26 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

9/10/2009 2:26 PM	Rate (0)
OmegaProjects Silver Member Joined: 11/14/2008 Last visit: 8/29/2023 Posts: 504 Rating: (22)	Hi , How can i delete the alarmarchive so that i have a new empty alarmlist ? I need to do this one time , so i don't want to use a vb-script. I've got an MP 377... Thanks in advance ..

Suggestion To thank Quote Answer

9/10/2009 7:42 PM	Rate (0)
FunStuff Posts: 103 Rating: (10)	If you want to do this from a button on the HMI you could use the ClearLog command with a Press or OnClick type event. If you want to do this from the 370 just shut down the Runtime and browse to folder the alarmlog is in and delete it. The path will be in the project, probably something like \\NetworkFolder\ or \\My Documents\or \Storage Card MMC\. It will regenerate again when Runtime starts.
FunStuff Posts: 103 Rating: (10)	Last edited by: FunStuff at: 9/10/2009 7:46 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tomy Master

9/11/2009 1:30 PM	Rate (0)
OmegaProjects Silver Member Joined: 11/14/2008 Last visit: 8/29/2023 Posts: 504 Rating: (22)	Hi , Thanks a lot for your reaction, I don't use a mmc card so I suppose that I have to be in the //Network - folder .. Where exactly can I find this folder that I've to delete , because I searched for it before and I couldn't find a thing :s Thanks in advance , Eyup Y

Suggestion To thank Quote Answer

9/11/2009 2:52 PM	Rate (0)
FunStuff Posts: 103 Rating: (10)	If you have the source project then you can just open it and open the tab called 'Historical Data' --> 'Alarm Log' and the path will be displayed under the column 'Path'. If you don't have the source project then I would suggest checking if the device is connect to a ethernet network. If it is not than the log must be stored locally. In this case I would re-boot the device and cancel Runtime execution before it executes by pressing exit on the runtime loader. From the desktop of the device browse to 'My Documents' and the alarm log may be there. If it is on an ethernet network the file could be anywhere and you need to have the source code to find the path.
FunStuff Posts: 103 Rating: (10)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on