Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

reset in_out udt

Created by: v.kerstholt at: 10/16/2013 1:22 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/16/2013 1:22 PM	Rate (0)
v.kerstholt Posts: 58 Rating: (9)	dear all, does someone know how to reset a whole in_out udt with 0 in tia portal? FILL(BLK => #udt, BVAL := #Zero); isn;t possible anymore.
v.kerstholt Posts: 58 Rating: (9)
Suggestion To thank Quote Answer

10/16/2013 3:04 PM	Rate (0)
Pittiplatsch Posts: 1368 Rating: (127)	Hello v.kerstholt, the FILL construction still exists for S7-300/400 and S7-1500 in TIA V12 Portal. Only the S7-1200 does not support this block. But perhapshas theFILL_BLK similar function? Greetings, Pittiplatsch
Pittiplatsch Posts: 1368 Rating: (127)
Suggestion To thank Quote Answer

10/17/2013 12:06 PM	Rate (0)
v.kerstholt Posts: 58 Rating: (9)	hi Pittiplatsch, yeah the s7-300 in TIA portal has a blockmove. but this blockmove doesnt support a block move from a static to a in_out udt... only in_out to static. try it yourself ;) grz
v.kerstholt Posts: 58 Rating: (9)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on