Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Retain memory FULL

Created by: J Gerritsen CDM at: 9/22/2014 8:06 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/22/2014 8:06 AM	Rate (0)
J Gerritsen CDM Regular Member Joined: 7/27/2012 Last visit: 12/5/2024 Posts: 24 Rating: (0)	Hi In my project I run against the limit of the memory to retain. (see attachment) Is there a way to save the retain memory somewhere else? (stored after powerdown) Its contains just 1 DB. Attachment screenshot.118.jpg (183 Downloads)

Suggestion To thank Quote Answer

9/22/2014 8:21 AM	Rate (0)
William_B Posts: 5225 Rating: (1198)	Hi there. Which PLC version do you have? Firmware version 4 allows you to save recipes on an external card. Also consider.. 1. The Panel can store recipes.. move some or all information there. I have a feeling you have a STRING also in the recipe. Am I right?... Use a hybrid between Panel and PLC recipe, let the Panel store the strings. 2. How many recipes are you storing? Do you need as many? Hope these thoughts are of value. w
William_B Posts: 5225 Rating: (1198)
Suggestion To thank Quote Answer

9/22/2014 9:01 AM	Rate (0)
J Gerritsen CDM Regular Member Joined: 7/27/2012 Last visit: 12/5/2024 Posts: 24 Rating: (0)	The cpu a 1215c 100kb The structure of the recept is simpel see atachment. it contans many UDTs Attachment screenshot.120.jpg (432 Downloads)
	Last edited by: jan1999999 at: 9/22/2014 9:05 AM Type V3.0 Last edited by: jan1999999 at: 9/22/2014 9:01 AM
Suggestion To thank Quote Answer

9/24/2014 2:26 PM	Rate (0)
Cicero Gold Member Joined: 10/10/2005 Last visit: 1/24/2025 Posts: 1932 Rating: (136)	Hello, see also the alternative with this programming methode in this FAQ: http://support.automation.siemens.com/WW/view/en/53034113 With best regards Cicero

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on