Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Retrieving an existing project

Created by: frst at: 10/28/2008 10:16 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/28/2008 10:16 AM	Rate (0)
frst Regular Member Joined: 10/2/2007 Last visit: 4/7/2023 Posts: 2 Rating: (1)	Hi, Whe have several fieldpg's with XP sp3 and win2000 sp4. On these pg's are several users and they have all administrator rights. The problem is that when we retrieve a project sometimes we can replace the existing project and sometimes we can't replace it, only add it. The only solution so faris to first delete the project and then retrieve it again. We have all S7 v5.4SP4 Revision level K5.4.4.0 Does somebody have a solution for this annoying problem Thanks Frank

Suggestion To thank Quote Answer

10/28/2008 3:07 PM	Rate (0)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 6/5/2023 Posts: 4184 Rating: (1342)	Hi, take a look at http://support.automation.siemens.com/BR/view/en/8250891and check ifyour STEP 7 is compatible with your operation system. ThatI know,Windows 2000 SP 4 is ok, but XP SP 3 not.
	Last edited by: Pegaia at: 10/28/2008 3:08 PM Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

10/28/2008 11:12 PM	Rate (0)
Hulzhex Gold Member Joined: 8/25/2005 Last visit: 5/25/2023 Posts: 1161 Rating: (110)	Pegaia Hi, take a look at http://support.automation.siemens.com/BR/view/en/8250891and check ifyour STEP 7 is compatible with your operation system. ThatI know,Windows 2000 SP 4 is ok, but XP SP 3 not. Hello Pegaia, have you seen note 15 at that page? Product Support For MS Windows XP Professional SP3 you require STEP 7 V5.4 SP4. Best regards Sabine

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on