Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

RING TOPOLOGY IN Y-LINK OR DP/PA LINK

Created by: micoy at: 8/30/2013 4:36 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/30/2013 4:36 AM	Rate (0)
micoy Posts: 10 Rating: (0)	Hi Good Day, Hi guys, we need some technical help regarding a DP-slave ring topology for our Motorized valve instrument. Most expert here told us to use an OLM for us to sustain the ring topology, but the sad part is we are new on this OLM. Guys, if it is not much of a trouble can you send us an example on how can we make a OLM ring topology using Y-link. We are grateful for any help and assist that may shared to us. THANK YOU GUYS.. And more power to our FORUM.. This is the best forum site so far I have been through..
micoy Posts: 10 Rating: (0)	Last edited by: micoy at: 8/30/2013 4:36 AM
Suggestion To thank

8/30/2013 9:22 AM	Rate (0)
Blue Moderator Platinum Member Joined: 4/21/2006 Last visit: 1/14/2025 Posts: 510 Rating: (24)	Thread is closed, because the question was posted twice. You can find the other thread here: ring topologies for the DP-slave using either of Y-link and DP/PA

Suggestion To thank

|

Share this page:

Share this page on...

Follow us on