Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Rotary knife in a CPU xT

Created by: Ena at: 2/11/2010 3:42 PM (3 Replies)

Rating (5)

Thanks 5

4 Entries

2/11/2010 3:42 PM	Rate (0)
Ena Regular Member Joined: 10/10/2008 Last visit: 4/28/2023 Posts: 7 Rating: (1)	Hi evrybody, I'have to implement a rotary knive in a 317T coupled to a simamics S120. I'have seen in documentation that there is a post for this application (id: 21669475) but I don't find it. If somebody has an example or a list of synchronisation. Thanks EnA

Suggestion To thank Quote Answer

2/11/2010 6:24 PM	Rate (2)
miami Platinum Expert Joined: 8/31/2005 Last visit: 9/14/2023 Posts: 2194 Rating: (322)	Ena Hi evrybody, I'have to implement a rotary knive in a 317T coupled to a simamics S120. I'have seen in documentation that there is a post for this application (id: 21669475) but I don't find it. If somebody has an example or a list of synchronisation. Thanks EnA Hello EnA, The removed item was a exampleexample.It was more a demo than a real application. It hadseveral simulations and was not designed to be a basis for own applications. But... There will bethe Technolpgy Template "CrossCutter" released in February!

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users H-H Ena

2/11/2010 8:00 PM	Rate (0)
Ena Regular Member Joined: 10/10/2008 Last visit: 4/28/2023 Posts: 7 Rating: (1)	Thank you very much. I'll prepare the other axis and I'll wait this template for the rotary knife. Best regards EnA

Suggestion To thank Quote Answer

2/17/2010 2:32 PM	Rate (3)
miami Platinum Expert Joined: 8/31/2005 Last visit: 9/14/2023 Posts: 2194 Rating: (322)	The template CrossCutteris now avaible: http://support.automation.siemens.com/WW/view/en/31073433

Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users Gebhardt Karl H-H ABHIJIT PUNE

|

Share this page:

Share this page on...

Follow us on