Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Rotation of a line in WinCC flexible Runtime

Created by: stijn at: 1/22/2007 3:14 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

1/22/2007 3:14 PM	Rate (0)
stijn Posts: 16 Rating: (0)	Hello I was wondering if it is possible to have a simple line rotate around its endpoint. Or is there another object (besides a line) which can dynamically turn around its endpoint. Considering the fact that I can't find any possibility in the Animations directory of the line's properties, I suppose I should use scripting? Or is this a misunderstanding? Or is it however not possible to make a line rotate? Thanks in advance Stijn
stijn Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

1/22/2007 4:02 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, you should work with graphics of your line (showing different angles) in different layers => switch a specific layer/angle visible at a certain time. http://support.automation.siemens.com/WW/view/en/22904862 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on