Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Routed S7 connection

Created by: PLCforEver at: 9/16/2013 5:39 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/16/2013 5:39 AM	Rate (0)
PLCforEver Posts: 99 Rating: (3)	Dear experts, I did not have time to test routed S7 connection this weekend with TIA WinCC Professionnal V12 runtime. Did someone had succes with it? I have an installation configured with Step7 V5.5. 1 CPU 315-2DP master with 2 x 315-2DP slave on a profibus network. A CP Lean was added on the 315-2DP master. With the project, I am able to monitor and modify program on all 3 PLCsthrought the Ethernet port of the CP Lean from Step7 V5.5. So I want to be able to monitor all 3 PLC via the ethernet port of the CP lean. I dont want to stop the system with an hardware download. I have reproduced the configuration of the hardware in TIA Portal. The hardware is recent enough to be available in the library. I succeeded to configure connection from DP port of a slave to the ethernet card of the PC but the line is broken between the 2 devices. The button 'Show best route' is not working. I have the warning message 314:89 when I compile: The connection is configured as a routed S7 connection and not IP routing. Do I have a chance of succes without downloading the TIAconfig to the PLCs? Best regards
PLCforEver Posts: 99 Rating: (3)	Last edited by: PLCforEver at: 9/16/2013 5:41 AM
Suggestion To thank Quote Answer

9/18/2013 11:30 AM	Rate (0)
Tweety Posts: 3037 Rating: (191)	Hello, Do you use modules with the S7 routing function? http://support.automation.siemens.com/WW/view/en/584459 Tweety
Tweety Posts: 3037 Rating: (191)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on