Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

RS-485 COMPATIBLE EQUIP ON ETHERNET NETWORK.

Created by: SRB2677 at: 10/7/2009 5:16 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

10/7/2009 5:16 AM	Rate (0)
SRB2677 Posts: 16 Rating: (0)	Hello All, Does anybody know how to take instrument with RS-485 port on Ethernet Network. I have energy meter with RS485 port and i need to take it on ethernet network to display the certain parameter in main control room. If yes then kindly provide me the schematic and equipment used. Regards, Sunil
SRB2677 Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

10/7/2009 5:25 AM	Rate (0)
Saravana kumar Gold Member Joined: 2/6/2009 Last visit: 8/19/2024 Posts: 939 Rating: (118)	HI, Could you please tell me what is the communication protocol you are going to use.
	_______________________________________________________________ Best Regards T.Saravana Kumar "All for the Best"
Suggestion To thank Quote Answer

10/7/2009 11:50 AM	Rate (0)
Mike J Platinum Member Joined: 10/9/2007 Last visit: 12/9/2024 Posts: 1252 Rating: (115)	Hi We need to know also if in your system you have the same protocol as your meter. Or will you use a gateway/conversor? Mike J
	Last edited by: Mike J at: 10/7/2009 11:51 AM Energy Automation products: Sicam, Siprotec, Digsi
Suggestion To thank Quote Answer

2/3/2010 7:32 PM	Rate (0)
Niranjan Prasad Posts: 691 Rating: (37)	I don't know your exact configuration but the following may give you some Idea link1 link2 See the hardware configuration also Attachment HARDWARE_CONFIG.GIF (102 Downloads)
Niranjan Prasad Posts: 691 Rating: (37)	Last edited by: Chimpu at: 2/3/2010 7:34 PM
Suggestion To thank Quote Answer

2/4/2010 4:41 AM	Rate (0)
Arnold78 Posts: 5 Rating: (0)	Look at www.redlion.net for the DataStationPlus. it will convert RS-485 to Ethernet with various of protocol options.
Arnold78 Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on