Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

RS232 cable configuration for Winpcin

Created by: eviolago at: 11/20/2007 9:25 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/20/2007 9:25 AM	Rate (0)
eviolago Posts: 2 Rating: (0)	Hello, Im a bit new here. Just want to ask if anyone knows the configuration of the RS232 cable used to back up the CNC programs. We usually use this RS232 cable but unfortunately the cable got damage and cannot find another cable like it. We tried using ordinary RS232 cable but it didnt work, i was wondering if there is some special configuration for this. If I cannot connect via RS232 can I use USB connection? We are using PC20. Tnx, edison
eviolago Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

11/20/2007 6:39 PM	Rate (0)
denzilg_sa Bronze Member Joined: 7/5/2007 Last visit: 1/7/2025 Posts: 77 Rating: (5)	Hi eviolago Refer to att. hope it can help Denzil Attachment RS232.pdf (1340 Downloads)

Suggestion To thank Quote Answer

12/10/2007 7:14 AM	Rate (0)
eviolago Posts: 2 Rating: (0)	We were onlyable to do the trial this weekenddue to some urgent activity. The coniguration is OK.We already finish the back up on all CNC machines here. Thanks for the help. Thanks a lot. Edison
eviolago Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on